WARNING   WARNING:  The system does not relieve you of your responsibility to drive with due care and attention. You may need to override the system if it does not turn the high beams on or off.
WARNING   WARNING:  You may need to override the system when approaching other road users.
WARNING   WARNING:  You may need to override the system during inclement weather.
WARNING   WARNING:  Do not use the system in poor visibility, for example fog, heavy rain, spray or snow.
WARNING   WARNING:  The system may not adapt the high beams to avoid glare if the lights of oncoming vehicles are hidden by obstacles, for example guard rails.
WARNING   WARNING:  Inspect and replace the windshield wiper blades regularly to make sure the camera sensor has a clear view. The windshield wiper blades must be the correct length.

About Glare-Free High Beam
The system is designed to prevent you from distracting other road users when the high beams are on.
Glare Free High Beam Pattern
ANormal High Beam.
BGlare-Free High Beam.
The system is designed to turn the high beams on if all of the following occur:
  • You switch the system on in the information display.
  • You set the lighting control to the autolamps position.
  • The ambient light level is low enough that high beams are required.
  • Your vehicle speed is greater than approximately 40 km/h (25 mph).
The system is designed to adapt the high beams to avoid glare if all of the following occur:
  • You switch the system on in the information display.
  • You set the lighting control to the autolamps position.
  • The system detects an approaching vehicle's headlamps or rear lamps.
High Beam Indicator  The high beam headlamp indicator remains on when the system adapts the high beams to avoid glare.
The system is designed to turn the high beams off if any of the following occur:
  • You switch the system off in the information display.
  • You set the lighting control to any position except autolamps.
  • You switch the rear fog lamps on.
  • The system detects severe rain, snow or fog.
  • The system detects street lighting.
  • The camera has reduced visibility.
  • Your vehicle speed falls below approximately 30 km/h (19 mph).
Switching Glare-Free High Beam On or Off
  1. Press the menu button on the steering wheel to enter the information display main menu.
  1. Select Settings.
  1. Select Vehicle.
  1. Select Lighting.
  1. Switch Glarefree Lighting on or off.
Glare-Free High Beam Indicator
Auto High Beam Indicator  It illuminates to confirm when the system is ready to assist.
Overriding Glare-Free High Beam
Push the lever away from you to switch between high beam and low beam.
Glare-Free High Beam Information Messages

Message   Description  
Front Camera Low Visibility Clean Screen
The camera has reduced visibility.Clean the windshield.If the message continues to appear, have your vehicle checked as soon as possible.  
Front Camera Temporarily Not Available
The camera has malfunctioned.Wait a short period of time for the camera to cool down.If the message continues to appear, have your vehicle checked as soon as possible.  
Front Camera Malfunction Service Required
The camera has malfunctioned.Have your vehicle checked as soon as possible.  

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok