WARNING   WARNING:  Bounce-back is off until you reset the memory. Take care when closing the windows to avoid personal injury or damage to your vehicle.

If you have disconnected the battery, you must reset the bounce-back memory separately for each window.
Carry out all steps within 30 seconds of starting the sequence.
  1. Close the window.
  1. Press and hold the window control switch until the window is fully open.Keep the switch pressed for a few seconds.
  1. Lift and hold the switch until the window is fully closed.Keep the switch held for a few seconds.
  1. Press and hold the switch until the window is fully open.Keep the switch pressed for a few seconds.
  1. Lift and hold the switch until the window is fully closed.Keep the switch held for a few seconds.
Note:   Repeat the procedure if the window does not close when you use one-touch.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok