Cleaning the Exterior - Cleaning Stripes or Graphics

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Cleaning Stripes or Graphics

It is recommended to wash your vehicle by hand however, pressure washing may be used under the following conditions:

Use a spray with a minimum of 40 ° wide spray angle pattern.
Keep the nozzle 12 in (30 cm) and at a 90 ° angle to your vehicle.
Do not use water pressure higher than 1,000 psi (6,895 kPa).
Do not use water hotter than 73 °F (23 °C).

Note: Holding the pressure washer nozzle at an angle to the vehicle's surface may damage graphics and cause the edges to peel away.

Owner's Manual Feedback

Please note that Ford will not respond to individual feedback.
Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
Your feedback will be investigated, and any necessary changes will be updated in the online Owner's Manual.

Submit

Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.

2021 Bronco Owner's Manual