Automatic High Beam Control - Automatic High Beam Control Limitations

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Automatic High Beam Control Limitations

The system turns the high beams off if any of the following occur:

You switch the system off.
You set the lighting control to any position except autolamps.
The ambient light level is high enough that you do not require high beams.
The system detects an approaching vehicle's headlamps or a leading vehicle's tail lamps.
The system detects severe rain, snow or fog.
The system detects street lighting.
The camera has reduced visibility.
The vehicle speed falls below approximately 27 mph (44 km/h).

Note: The deactivation speed may be lower on curves.

Owner's Manual Feedback

Please note that Ford will not respond to individual feedback.
Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
Your feedback will be investigated, and any necessary changes will be updated in the online Owner's Manual.

Submit

Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.

2021 Bronco Owner's Manual