This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Engine Coolant Check - Diesel
WARNING:
Do not dispose of coolant in the household refuse or the public sewage system. Use an authorized waste disposal facility.
WARNING:
Do not put coolant in the windshield washer reservoir. If sprayed on the windshield, coolant could make it difficult to see through the windshield. |
Make sure that the coolant level is between the MIN and MAX marks on the coolant reservoir at ambient temperature. If the coolant level is at or below the minimum mark, immediately add coolant.
The coolant concentration should be maintained within 48% to 50%, which equates to a freeze point between
-34 °C and
-37 °C.
Note:
Coolant expands when it is hot.The level may extend beyond the MAX mark.
Note:
Do not use stop leak pellets, cooling system sealants, or non-specified additives as they can cause damage to the engine cooling or heating systems.
Adding Coolant
|
WARNING:
Do not remove the coolant reservoir cap when the engine is on or the cooling system is hot. Wait 10 minutes for the cooling system to cool down. Cover the coolant reservoir cap with a thick cloth to prevent the possibility of scalding and slowly remove the cap. Failure to follow this instruction could result in personal injury.
WARNING:
Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your physician.
WARNING:
Undiluted coolant is flammable and may ignite if spilled on a hot exhaust. |
We do not recommend the use of recycled engine coolant since a Ford-approved recycling process is not yet available.
Do not mix different colors or types of coolant in your vehicle.
Note:
Add a 50/50 mixture of antifreeze and water or prediluted engine coolant that meets the correct specification.
Note:
Use fluids which meet the specifications or requirements defined. Use of other fluids may lead to damage which is not covered by the vehicle Warranty. See
Capacities and Specifications.
To top up the coolant level do the following:
- Remove the coolant reservoir cap.
- Add coolant to the MAX mark, do not overfill.
- Replace the coolant reservoir cap.Turn it clockwise until you feel a strong resistance.
In case of emergency, you can add water without engine coolant in order to reach a vehicle service location.
Note:
Prolonged use of an incorrect dilution of coolant can cause damage, for example corrosion, overheating or freezing.
- Please note that Ford will not respond to individual feedback.
- Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
- Your feedback will be investigated, and any necessary changes will be updated in the online Owner's Manual.
Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.