This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Changing a Bulb - Vehicles With: Halogen Projector Headlamps
WARNING:
Switch the lamps and the ignition off. Failure to follow this warning could result in serious personal injury.
WARNING:
Lamps and associated components become hot when in use. Let them cool down before you remove them. |
Only fit bulbs of the correct specification. See
Bulb Specification Chart - Vehicles With: Halogen Projector Headlamps.
Note:
We recommend that you see an authorized dealer to change the bulbs if your vehicle has air conditioning.
Headlamp
A Headlamp low beam.B Headlamp high beam.C Daytime running lamps.Front position lamps.D Front direction indicator. |
You may have to remove the headlamp assembly prior to replacing a bulb. See
Removing a Headlamp.
| AHeadlamp high beam. B Headlamp low beam.C Front direction indicator. |
Front Direction Indicator
- Turn the bulb holder counterclockwise and remove it.
- Press the bulb in and turn the bulb counterclockwise to remove it.
- To install, reverse the removal procedure.
Headlamp Low Beam
- Carefully remove the cover.
- Release the clip and remove the bulb.
- Disconnect the electrical connector.
- To install, reverse the removal procedure.
Note:
Do not touch the bulb glass.
Headlamp High Beam
- Carefully remove the cover.
- Release the clip and remove the bulb.
- Disconnect the electrical connector.
- To install, reverse the removal procedure.
Note:
Do not touch the bulb glass.
Daytime Running Lamp and Front Position Lamps
These lamps have LEDs.
Note:
LED lamps are not serviceable.Have your vehicle checked as soon as possible.
Front Fog Lamps
- Gently press the fog lamp trim inward and then slide it toward the outer edge of the bumper.
- Remove the screws that secure the lamp assembly.
- Remove the lamp.
- Disconnect the electrical connector.
- Turn the bulb holder counterclockwise and remove it.
Note:
You cannot separate the bulb from the bulb holder.
- To install, reverse the removal procedure.
Side Repeater
- Fold the mirror fully forward.
- Remove the screw.
- Using a screwdriver, gently pry the clip to release the lamp.
- Remove the lamp.
- Remove the bulb holder by pulling it straight out.
- Remove the bulb by pulling it straight out.
- To install, reverse the removal procedure.
Rear Lamp
| ARear lamp and stoplamp. B Rear direction indicator.C Reversing lamp.D Rear fog lamp. |
- Remove the wing nut.
- Remove the screws.
- Remove the lamp and unclip the bulb holder.
- Press the bulb in and turn the bulb counterclockwise to remove it.
Central High Mounted Stoplamp
- Remove the rubber grommets.
Note:
You may need to remove a trim panel first.
- Using a screwdriver, gently pry the clip to release the lamp.
- Remove the lamp.
- Remove the bulb by pulling it straight out.
License Plate Lamp
- Using a screwdriver, gently pry the clip to release the lamp.
- Remove the bulb.
Interior Lamp
Entrance Lamps
- Using a screwdriver, gently pry the clip to release the lamp.
- Remove the bulb.
Vehicles with Interior Sensors
- Remove the lamp lens.
- Remove the bulb.
Reading Lamps
- Using a screwdriver, gently pry the clip to release the lamp.
- Turn the bulb holder counterclockwise and remove it.
- Remove the bulb by pulling it straight out.
Vanity Mirror Lamp
- Remove the lamp.
- Remove the bulb by pulling it straight out.
- Please note that Ford will not respond to individual feedback.
- Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
- Your feedback will be investigated, and any necessary changes will be updated in the online Owner's Manual.
Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.