This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Rear Seats (If Equipped)
Removing the Seat Cushion
Super Cab
Folding the Seat Cushion
- Place the passenger side seat buckles behind the elastic strap on the seat backrest.
- Place the driver side seat buckle behind the elastic strap on the seat backrest.
- Pull the tether straps.
- Raise the seat cushion.
Note:
When folding the cushion up, make sure that the seatbelt buckles are visible to an occupant and are not under the seat.
Unfolding the Seat Cushion
WARNING:
Make sure that cargo and other objects are not trapped under the seat cushion and that you return the seat cushion to the full-down position. Failure to do so may prevent the seat from operating properly, which could increase the risk of serious injury in a crash. |
- Push the seat cushion down.
- Remove the seatbelt buckles from behind the elastic strap on the seat backrest.
Note:
You must stow the cushion tether strap in the pocket provided.
Folding the Seat Backrest
|
WARNING:
When folding the seat backrest down, take care not to get your fingers caught in the mechanism. |
Note:
Do not use the rear surface of the rear seat backrest as a load floor.
Note:
Do not unlatch and fold the seat backrest when the seat cushion is folded up.
- Pull the release strap up.
- Push the seat backrest forward.
Unfolding the Seat Backrest
|
WARNING:
Make sure that the seats and the seat backrests are secure and fully locked in their catches. |
Note:
When unfolding the seat backrest, make sure that the seatbelts are visible to an occupant and not caught behind the seat.
Thank You For Your Feedback