This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Seatbelt Reminder
This lamp illuminates and a warning tone sounds if you do not fasten your seatbelt when you switch the ignition on. The lamp and tone turn off when you fasten your seatbelt or about one minute has elapsed.
This lamp illuminates when you switch the ignition on, identifying the number of seating positions with fastened buckles. It illuminates again when a seating position changes from unfastened to fastened.
WARNING:
The system will only provide protection when you use the seatbelt correctly. |
This system monitors all seating positions and provides audio and graphic feedback.
This lamp illuminates and a warning tone sounds if you do not fasten your seatbelt when you switch the ignition on. The lamp and tone turn off when you fasten your seatbelt or about one minute has elapsed.When the initial warning expires for the driver, more warnings are provided for the driver and front passenger. This lamp illuminates and a warning tone sounds if you or your front passenger do not fasten the seatbelt buckle and the vehicle speed exceeds
6 mph (9.7 km/h). To deactivate the warning, see Deactivating and Activating the Belt-Minder Feature.
Note:
To avoid inadvertent warnings, do not place large objects on the seat.
This lamp illuminates when you switch the ignition on, identifying the number of seating positions with fastened buckles. It illuminates again when a seating position changes from unfastened to fastened.This warning displays and a tone sounds if an occupant unfastens the rear seatbelt buckle or it becomes unfastened.
Note:
If a rear seat is unoccupied, or an occupant never fastens the seatbelt buckle to begin with, the warning will not display.
Note:
Front seating positions appear in this warning display. Warnings for unfastened front seatbelt buckles appear in the initial warning lamp.
Seatbelt Status
A Seatbelt fastened.B Seatbelt not fastened.C Seatbelt recently unfastened.D Fault. |
To view the seatbelt status, use the information display controls on the steering wheel.
Deactivating and Activating the Seatbelt Reminder (Front Seats Only)
|
WARNING:
While the system allows you to deactivate it, this system is designed to improve your chances of being safely belted and surviving an accident. We recommend you leave the system activated for yourself and others who may use the vehicle. |
Note:
The driver and front passenger warnings switch on and off independently. When you perform this procedure for one seating position, do not buckle the other position as this terminates the process.
Read Steps 1 - 4 before starting the procedure.
Make sure that:- You set the parking brake.
- The transmission is in park (P).
- The ignition is off.
- You close all vehicle doors.
- You unbuckle the driver and front passenger seatbelts.
- Switch the ignition on.Do not start the engine.
- Wait until the seatbelt warning lamp turns off (about one minute). After Step 2, wait an additional five seconds before proceeding with Step 3. Once you start Step 3, you must complete the procedure within 60 seconds.
- For the seating position you are switching off, buckle then unbuckle the seatbelt three times at a moderate speed, ending in the unbuckled state. After Step 3, the seatbelt warning lamp turns on.
- When the seatbelt warning lamp is on, buckle then unbuckle the seatbelt. After Step 4, the seatbelt warning lamp flashes for confirmation.
- This switches the feature off if it is currently on.
- This switches the feature on if it is currently off.
Thank You For Your Feedback