This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Trail Control – Information Messages
| Message | Action |
|---|---|
Reduce Speed To Enter Trail Control | Displays when you must reduce your vehicle speed to use trail control. |
Trail Control Not Available with Park Brake Applied | Displays when you must release the park brake to use trail control. |
Trail Control Enabled Use SET Button to Set Speed | Displays when you successfully enabled trail control and can set a speed with the SET+ or SET- control. |
Trail Control Off Driver Resume Control | Displays when a system fault has occurred when trail control was active and the driver must resume control. |
Trail Control Off | Displays when the system has turned off. |
Trail Control Fault See Manual | Displays when a system fault is present. See the trail control section in your Owner's Manual. |
Trail Control To Activate Select Gear | Displays when you must be in drive (D), neutral (N) or reverse (R) to use trail control. |
Trail Control Not Available with Cruise Control Active | Displays when you must switch the cruise control off to use trail control. |
Trail Control Not Available with Driver Door Open | Displays when you must close the driver door to use trail control. |
Descent Control Now Active Press Trail Control Switch To Exit | You switched Descent Control off, causing the system to turn trail control propulsion off. The vehicle still brakes if descending a hill. You must press the trail control switch to reset the system and switch it off. You can press the switch again to switch this system on. |
Thank You For Your Feedback