Stability Control - Using Stability Control - ST

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Using Stability Control - ST

WARNING: Do not switch off stability control or use Sport, Track or Drift mode when using a temporary spare wheel or after inflating a tire using the temporary mobility kit.

The system turns on each time you switch the ignition on.

Reducing Stability Control

Press the button on the center console. A warning lamp illuminates and a message appears in the information display. Press the button again to switch the system on.

Note: Stability control only reduces and is not fully switched off.

Note: If you switch stability control to reduced mode, traction control turns off.

Note: Pre-collision assist is disabled when you select this mode.

Note: Adaptive cruise control is disabled when you select this mode.

Switching the System Off

Press and hold the button on the center console for a few seconds to switch the system off. A warning lamp illuminates and a message appears in the information display. Press the button again to switch the system on.

Note: If you switch stability control off, traction control also turns off

Note: Pre-collision assist is disabled when you select this mode.

Note: Adaptive cruise control is disabled when you select this mode.

Note: If you use a programmed MyKey, you cannot switch the system off.

Stability Control and Traction Control Indicator

Flashes during operation.

If it does not illuminate when you switch the ignition on, or remains on when the engine is running, this indicates a malfunction. Have your vehicle checked as soon as possible.

Note: The system automatically turns off if there is a malfunction.

Stability Control and Traction Control Off Warning Lamp

Illuminates when you switch the system off or to reduced mode. It also illuminates if you select track mode.

Owner's Manual Feedback

Please note that Ford will not respond to individual feedback.
Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
Your feedback will be investigated and any necessary changes will be updated in the online Owner's Manual.

Submit

Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.

Stability Control - Using Stability Control - ST

Using Stability Control - ST

Focus Owner's Manual