Filling the AdBlue® tank using a fuel station pump is similar to refueling your vehicle.
- Fully open the fuel filler door.
- Remove the AdBlue® tank filler cap.
- Fully insert the AdBlue® pump nozzle.
- Operate the AdBlue® pump nozzle within the area shown.
Note:
The pump nozzle shuts off when the tank is full.
- Slightly raise the AdBlue® pump nozzle and then slowly remove it.
- Replace the AdBlue® tank filler cap.Turn it clockwise until you feel a strong resistance and it clicks.
Do not attempt to start the engine if you have filled the AdBlue® tank with incorrect fluid. Incorrect fluid use could cause damage not covered by the vehicle Warranty. Have your vehicle checked as soon as possible.