WARNING   WARNING:  Switch the lamps and the ignition off. Failure to follow this warning could result in serious personal injury.
WARNING   WARNING:  Make sure the bulbs have cooled down before removing them. Failure to follow this warning could result in serious personal injury.

 Use the correct specification bulb.See   Exterior Bulb Specification Chart. 
 You must remove the headlamp assembly prior to replacing any bulb.See   Removing a Headlamp Assembly. 
Note:   LED lamps are not serviceable.See an authorized dealer if they fail.
Headlamp Bulb Positions
AFront parking lamp and front turn signal lamp.
BHeadlamp high beam.
CHeadlamp low beam and daytime running lamp.
DFront side marker lamp.
Replacing the Headlamp High Beam Bulbs
Image Shown Without Description
  1. Carefully remove the cover.
  1. Turn the bulb counterclockwise and remove it.
  1. Disconnect the electrical connector.
  1. To install, reverse the removal procedure.
Note:   Do not touch the bulb glass.
Note:   You cannot separate the bulb from the bulb holder.
Replacing the Headlamp Low Beam and Daytime Running Lamp Bulbs
Image Shown Without Description
  1. Carefully remove the cover.
  1. Turn the bulb counterclockwise and remove it.
  1. Disconnect the electrical connector.
  1. To install, reverse the removal procedure.
Note:   Do not touch the bulb glass.
Note:   You cannot separate the bulb from the bulb holder.
Replacing the High Intensity Discharge Headlamp Bulbs
 These lamps operate at a high voltage.See an authorized dealer if they fail.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok