The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Cleaning the Wheels
Note:
Do not apply a cleaning chemical to warm or hot wheel rims and covers.
Note:
Industrial-strength (heavy-duty) cleaners, or cleaning chemicals, in combination with brush agitation to remove brake dust and dirt, could wear away the clear coat finish over a period of time.
Note:
Do not use hydrofluoric acid-based or high caustic-based wheel cleaners, steel wool, fuels or strong household detergent.
Note:
If you intend parking your vehicle for an extended period after cleaning the wheels with a wheel cleaner, drive your vehicle for a few minutes before doing so. This will reduce the risk of increased corrosion of the brake discs, brake pads and linings.
Note:
Some automatic car washes may cause damage to the finish on your wheel rims and covers.
Alloy wheels and wheel covers are coated with a clear coat paint finish. To maintain their condition we recommend that you:- Clean them weekly with the recommended wheel and tire cleaner.
- Use a sponge to remove heavy deposits of dirt and brake dust accumulation.
- Rinse them thoroughly with a pressurized stream of water when you have completed the cleaning process.
Consult your authorized dealer for approved cleaning products.
Using other non-recommended cleaning products can result in severe and permanent cosmetic damage.
Thank You For Your Feedback