The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2023 Ford Motor Company
Creating a MyKey
Use the information display to create a MyKey:
- Insert the key you want to program into the ignition.
- Switch the ignition on.
- Access the main menu on the information display controls. Use the arrow keys to get to the following menu selections:
| Message | Action and Description |
|---|---|
Settings | Press the OK button or the right arrow key. |
MyKey | Press the OK button or the right arrow key. |
Create MyKey | Press the OK button or the right arrow key. |
When prompted, hold the OK button until you see a message informing you to label this key as a MyKey. The key will be restricted at the next start.
MyKey is successfully created. Make sure you label it so you can distinguish it from the admin keys.
You can also program configurable settings for the key(s). See Programming/Changing Configurable Settings.
Programming/Changing Configurable Settings
Use the information display to access your configurable MyKey settings.
- Switch the ignition on using an admin key or remote control.
- Access the main menu on the information display controls. Use the arrow keys to get to the following menu selections:
| Message | Action and Description |
|---|---|
Settings | Press the OK button or the right arrow key. |
MyKey | Press the OK button or the right arrow key. |
Note:
You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the vehicle off, however, you will need an admin key to change or clear your MyKey settings.