WARNING   WARNING:  Keep batteries away from children to prevent ingestion. Failure to follow this instruction could result in personal injury or death. If ingested, immediately seek medical attention.
WARNING   WARNING:  If the battery compartment does not securely close, stop using the remote control and replace it as soon as possible. In the meantime, keep the remote control away from children. Failure to follow this instruction could result in personal injury or death.

The remote control uses one coin-type 3-volt lithium battery, CR2450, or equivalent.
Key Blade Release Button
  1. Push the release button and pull the key blade out.
Intelligent Access Key Cover Removal
  1. Twist a thin coin under the tab hidden behind the key blade head to remove the battery cover.
Intelligent Access Key Battery Replacement
  1. Insert a screwdriver in the position shown and carefully remove the battery.
  1. Insert a new battery with the + facing upward.
  1. Reinstall the battery cover onto the remote control and install the key blade.
Battery Disposal 
Note:   Refer to local regulations before you dispose of the remote control batteries.
Note:   Do not wipe off any grease on the battery terminals or on the back surface of the circuit board.
Note:   Replacing the remote control battery does not erase the programmed key from your vehicle.The remote control operates as normal.
Note:   A message appears in the information display when the remote control battery is low.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok