DC Charging - Stopping Charging

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of going to print.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Stopping Charging

Push the coupler unlock button on the light ring and remove the charge coupler handle from the vehicle.

Close the dust cap for the additional lower connectors.

Note: Do not attempt to remove the charge coupler before you unlock it. Do not use any kind of tool to try and remove a locked charge coupler. Doing so can lead to damage to your vehicle and the charge coupler.

Note: You cannot unlock the charge coupler handle unless the vehicle remote is near the vehicle.

Note: You can also unlock the cord through the vehicle touchscreen. If the cord still does not unlock, please contact roadside assistance.

Note: You cannot shift your vehicle out of park (P) until you remove the charge coupler handle.

Press the center right-hand edge of the charge port door to close.

Charge Coupler Manual Release

If your vehicle does not unlock the charge coupler, you can manually release it.

Releasing the charge coupler:

Switch off your vehicle.

Open the hood.

Remove the inner luggage compartment shields and locate the low voltage service disconnect. See Installing and Removing the Luggage Compartment Cover.

Move the low voltage service disconnect to the off position.

Locate the manual release mechanism.

Between the gap of the hood and windshield, access the manual release mechanism and pull the pull ring firmly, perpendicularly towards the center of your vehicle. Once pulled, make sure you do not tangle the pull ring cord as it resets on the next charge session.

Remove the charge coupler from the charge port.

Close the low voltage service disconnect.

Reinstall the inner luggage compartment shields. See Installing and Removing the Luggage Compartment Cover.

Close the hood.

Note: The next time you plug in to charge your vehicle, the locking mechanism re-engages and the pull ring resets.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

2022 Mustang Mach-E Owner's Manual