Keyless Entry Keypad - Keyless Entry Keypad Master Access Code

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of going to print.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Keyless Entry Keypad Master Access Code

What Is the Master Access Code

The master access code is a factory-set seven-digit entry code. You can operate the keypad with the master access code at any time. The master access code can be displayed in the instrument cluster display.

Displaying the Master Access Code in the Instrument Cluster Display

Read and understand the following before you begin the process.

You must have two keys inside your vehicle.
Make sure that you close all the doors and that they remain closed throughout the procedure.
Do not place the device on the wireless accessory charging area during the procedure.

Note: Perform all steps within 30 seconds of starting the sequence. If you perform any of the steps out of sequence, stop and wait for at least one minute before starting again.

Turn the vehicle off.

Place the first key into the backup slot.See Accessing the Passive Key Backup Position - Vehicles Built From: 10/2024 .

Turn on the vehicle, without pressing the brake pedal, and wait for a few seconds.

Turn off the vehicle and replace the first key with the second key.

Turn on the vehicle, without pressing the brake pedal.

The master access code appears in the instrument cluster display for a few seconds.

Note: The code may not display until after other warning messages display.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

2022 Mustang Mach-E Owner's Manual