Make sure you have phone as a key active on at least one phone to use a previously created backup start passcode.   See   Programming Your Phone
  1. Press the brake pedal and the push button start. If the system does not detect a valid phone as a key or remote control, a message appears on the touchscreen and prompts you for your backup start passcode.
Note:   The touchscreen times out after 30 seconds with no interaction.
Note:   If the backup start passcode screen does not appear, press the brake pedal and push button start again.
  1. Use the touchscreen to enter your backup start passcode.
  1. After entering your passcode, press return within 30 seconds.
  1. Once the system validates the backup start passcode, a message alerts you to start your vehicle.
  1. Press the brake pedal and the push button start within 20 seconds to start the vehicle.
  1. If your vehicle does not start, repeat steps 1-5.
System Lockout
The system locks after five combined incorrect attempts of the following:
  • Entering a backup start passcode.
  • Resetting a current passcode.
  • Entering a valet mode passcode.
Note:   The system remains locked for five minutes. After five minutes the system allows codes to be entered again.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok