Accessing the Towing Point (If Equipped)
Image Shown Without Description
  1. Using a suitable tool, such as a screwdriver, pull from the top edge of the towing eye cover.
Note:   The towing eye cover has a small lanyard to keep it attached to the bumper.
  1. To install, reverse the removal procedure.
Attaching the Towing Eye (If Equipped)
WARNING   WARNING:  Make sure that the towing eye is fully tightened. Failure to follow this instruction could result in personal injury.
WARNING   WARNING:  You must switch the ignition on when your vehicle is being towed.

Image Shown Without Description
  1. Carefully remove the front or rear towing eye attachment point cover.
  1. Install the towing eye.
Note:   The towing eye has a left-hand thread.Turn it counterclockwise to install it.
  1. To remove, reverse the installation procedure.
Towing Eye Location (If Equipped)
Recovery Eye
The towing eye is in the spare wheel storage tray. If your vehicle does not have a towing eye, one can be purchased at your dealer.
Note:   You must carry the towing eye in your vehicle at all times.