This view of the Owner’s Manual contains the very latest information, which may vary slightly from the printed Owner’s Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner’s Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
For the high beam and low beam bulbs, remove the rubber cap to access the bulbs.
Remove the bulb holder from the lamp assembly by turning it counterclockwise and pulling it straight out.
Disconnect the bulb from the electrical connector.
To install, reverse the removal procedure.
Note:
Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.
Note:
If the bulb is accidentally touched, clean it with rubbing alcohol before installing it.