MyKey™ - Creating a MyKey

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Creating a MyKey

Use the touchscreen to create a MyKey:

Insert the key you want to program into the ignition. If your vehicle has a push-button start, place the remote control into the backup slot. See Starting a Gasoline Engine.

Switch the ignition on.

Access the main menu in the touchscreen and then scroll through the menus to change the settings of your MyKey. From the MyKey menu, select the option Create MyKey. See Settings.

Press Yes if you want to create the key as a MyKey. A confirmation message appears on the screen.

Switch the ignition off.

You have successfully created a MyKey. Make sure you label it so you can distinguish it from the admin keys.

You can also program configurable settings for the key.

Programming and Changing Configurable Settings

Use the touchscreen to access your configurable MyKey settings.

Switch the ignition on using an admin key or the remote control you want to program.

Access the main menu in the information display and then scroll through the menus to change the settings of your MyKey. See Settings.

Follow the instructions in the touchscreen.

The programmed restrictions apply when you switch the vehicle off, open and close the driver door and restart your vehicle with the programmed key or remote control.

Note: You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey.Once you have switched the vehicle off, however, you need an admin key to change or clear your MyKey settings.When you make any changes to your MyKey settings, you change the settings for every MyKey.You cannot make individual changes to apply to specific MyKeys.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

2022 Explorer Owner's Manual