Adaptive Cruise Control (If Equipped) - Switching Adaptive Cruise Control On and Off

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Switching Adaptive Cruise Control On and Off

The cruise controls are on the steering wheel.See Cruise Control - Vehicles With: Stop and Go.

Switching Adaptive Cruise Control On

Press the button to set the system in standby mode.

The indicator, current gap setting and set speed appear in the information display.

Switching Adaptive Cruise Control Off

Press the button when the system is in standby mode, or switch the ignition off.

Note: You erase the set speed when you switch the system off.

Automatic Cancellation or Deactivation

The system may cancel if:

The tires lose traction.
You apply the parking brake.

The system may cancel and set the parking brake if:

You unbuckle the seatbelt and open the driver door after you stop your vehicle.
Your vehicle is at a stop continuously for more than three minutes.

The system may turn off or prevent activating when requested if:

The vehicle has a blocked sensor.
The brake temperature is too high.
There is a failure in the system or a related system.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

2022 Explorer Owner's Manual