Center Console Work Surface - Using the Center Console Work Surface - Vehicles With: Column Shift

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Using the Center Console Work Surface - Vehicles With: Column Shift

Center Console Work Surface with Column Shifter

Push the lever on the side of the seat and fold the seat down.

There are three different positions:

Home position.
B.

Forward position.
C.

Rotated position.

Push the latch down on the top of the work surface to move it to the forward position. There are 11 lockable positions.

Center Console Luggage Compartment Lid Release

Push the latch on the side of the work surface to rotate it toward the driver. It rotates into 11 lockable positions in 5 ° increments.

Note: The work surface must be in the home position when driving your vehicle.

Note: Do not drive with the work surface rotated. This could interfere with steering your vehicle.

Note: Do not adjust the steering column with a rotated work surface.

Note: Do not raise the seat when the work surface is in the forward or rotated positions to avoid damaging it.

Note: To avoid damaging the work surface, do not use it as a handle when entering or exiting the vehicle.

Floor Console (If Equipped)

Press the button to release the folding surface.

Open the work surface. Fold the work surface to close.

Owner's Manual Feedback

Submit

Thank You For Your Feedback