Blind Spot Information System Setting up the Trailer Length
ATrailer length.
BTrailer width.
CTrailer hitch ball.
You can set-up a trailer to work with the blind spot information system through the touchscreen by using the add trailer menu.
  1. Input the trailer name and trailer type, conventional, gooseneck or fifth wheel, then save to continue trailer setup.
Note:   The system only supports conventional trailers.
  1. Trailer width measurement. Measure the width at the front of the trailer. It is not measured at the widest point of the trailer. The maximum width at the front of the trailer the system can support is 8.5 ft (2.6 m).
Note:   If the trailer is a bike rack or cargo rack with electrical lighting, enter a length of around 3 ft (1 m). Cross traffic alert remains on for trailers with a length of 3 ft (1 m) or less.
Note:   The system requires proper measurement and measure entry to properly function.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok