Pre-Collision Assist (If Equipped) - Switching Pre-Collision Assist On and Off (If Equipped)

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Switching Pre-Collision Assist On and Off (If Equipped)

To switch the system on or off, use the touchscreen:

Press Features on the touchscreen.

Press Driver Assistance.

Press Pre-Collision Assist.

Switch the feature on or off.

Adjusting the Pre-Collision Assist Settings

You can adjust the following settings by using the touchscreen controls in the pre-collision assist menu:

Change alert and distance alert sensitivity to one of three possible settings.
Switch distance indication and alert on or off.
If required, switch automatic emergency braking on or off.
If required, switch evasive steering assist on or off.

Note: Automatic emergency braking and evasive steering turn on every time you start your vehicle.

Note: If your vehicle has a radar sensor, we recommend that you switch the system off if you install a snow plow or similar object in such a way that it may block the radar sensor. Your vehicle remembers the selected setting across key cycles.

Note: If you switch automatic emergency braking off, evasive steering assist switches off.

Owner's Manual Feedback

Submit

Thank You For Your Feedback