Storing the Bed Ramp
- Pick up the ramp. Pull the location pin outward.
- Slide the ramp into the storage position until the location pin locks.
Note:
Make sure the proper pin location has been applied for your bed size.
- Slide the ramp claw off of the tailgate plate.
- Rotate the stops at the underside of the ramp to the closed position.
- Place the ramp into the ramp holder.
- Install the cam bolts and close the cam lever arms.
- Attach the front and rear cables.
Note:
Make sure you properly secure the locking cable. If the locking cable is unsecured, you may hear a rattling noise.