1. Lower the tailgate.
  1. Push the button in the center of the step molding. The step pops out slightly.
Opening the Tailgate Step
  1. Pull the step out fully. Lower the step to its lowest position.
Tailgate
  1. Pull the yellow handle stop backward out of the tailgate until it fully extends.
  1. To lock the handle in place, rotate the handle up from the horizontal to the vertical position until you hear a click.
Note:   Do not tow with the step or grab handle.
Replace the slip resistance tape or grab handle molding if it appears as worn or damaged.
To reduce the risk of falling:
  • Only operate the step when your vehicle is on a level surface.
  • Only operate the step in areas with sufficient lighting.
  • Make sure you use the grab handle when climbing on the step.
  • Do not use the step with bare feet.
  • Make sure the step is clean before use.
  • Keep the step load below the total maximum load of 350 lb (159 kg).

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok