MyKey™ (If Equipped) - Creating a MyKey - Vehicles With: Push Button Start

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Creating a MyKey - Vehicles With: Push Button Start

Vehicles with a center console shifter:

Remove the mat from the center console cup holder.

Remove the key blade from the remote control.

Place the remote control in the backup slot with the buttons facing toward the rear of the vehicle.

Switch the ignition on using the key you want to create as MyKey.

Press Settings on the touchscreen.

Press Vehicle Settings.

Press MyKey.

Press Create MyKey.

Press Yes.

Switch the ignition off.

Note: You successfully created a MyKey. We recommend that you label this key so you can distinguish it from the admin keys.

Note: The programmed restrictions apply when you switch the vehicle off, open and close the driver door and restart your vehicle with the programmed key or remote control.

Vehicles with a column shifter:

Raise the center console storage compartment lid.

Remove the key blade from the remote control.

Place the remote control in the backup slot with the buttons facing toward the rear of the vehicle.

Switch the ignition on using the key you want to create as MyKey.

Press Settings on the touchscreen.

Press Vehicle Settings.

Press MyKey.

Press Create MyKey.

Press Yes.

Switch the ignition off.

Note: You successfully created a MyKey. We recommend that you label this key so you can distinguish it from the admin keys.

Note: The programmed restrictions apply when you switch the vehicle off, open and close the driver door and restart your vehicle with the programmed key or remote control.