WARNING:
Do not use cruise control on winding roads, in heavy traffic or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death.
WARNING:
When you are going downhill, your vehicle speed could increase above the set speed. The system does not apply the brakes. |
Note:
The system cancels if your vehicle speed drops below
10 mph (16 km/h) under the set speed when driving uphill.
The cruise controls are on the steering wheel.See
Cruise Control
.
Switching Cruise Control On
Press ON.
The indicator appears in the information display. | |
Setting the Cruise Speed
Drive to the speed you prefer.
Press to set the current speed. |
Press to set the current speed. |
Take your foot off the accelerator pedal.
Note:
The indicator changes color.
Changing the Set Speed
Press and release to increase the set speed in small increments. |
Press and release to decrease the set speed in small increments. |
Press and hold either button to accelerate or decelerate, respectively. Release the button when you reach the speed you prefer.
Press the accelerator or brake pedal until you reach the speed you prefer. Press either button.
Note:
If you accelerate by pressing only the accelerator pedal, the set speed does not change.When you release the accelerator pedal, your vehicle returns to the speed that you previously set.
Canceling the Set Speed
Press the button, or tap the brake pedal to cancel the set speed.
Note:
The system remembers the set speed.
Resuming the Set Speed
Press to resume the set speed. | |
Switching Cruise Control Off
Press and release the button when the system is in standby mode or switch the ignition off.
Note:
You erase the set speed when you switch the system off.