- Lower the tailgate.
- Push the button in the center of the step molding. The step pops out slightly.
- Pull the step out fully. Lower the step to its lowest position.
- Pull the yellow handle stop backward out of the tailgate until it fully extends.
- To lock the handle in place, rotate the handle up from the horizontal to the vertical position until you hear a click.
Note:
Do not tow with the step or grab handle.
Replace the slip resistance tape or grab handle molding if it appears as worn or damaged.
To reduce the risk of falling:
- Only operate the step when your vehicle is on a level surface.
- Only operate the step in areas with sufficient lighting.
- Make sure you use the grab handle when climbing on the step.
- Do not use the step with bare feet.
- Make sure the step is clean before use.
- Keep the step load below the total maximum load of
350 lb (159 kg).