WARNING:
Do not use an ungrounded wall outlet. The wall outlet must be in good condition and meet up-to-date local codes. Have a qualified electrician check the wall outlet, if you suspect that it is not properly grounded. Failure to follow this instruction could result in electric shock, personal injury, or death. WARNING: It is recommended that electrical outlets for use with your charging equipment be installed by a licensed, qualified electrician. Installations must comply with the provisions of all local codes. Failure to follow this warning could result in personal injury or death. WARNING: Do NOT DROP the control box or coupler. WARNING: Do NOT use if stored outside temperature range specified. WARNING: Do not attempt to repair the charging equipment. Contact your local dealer for assistance. WARNING: Read all warnings on the charging equipment before using for the first time. WARNING: Read all instructions in this publication before using the charging equipment. WARNING: To reduce the risk of fire, connect only to a circuit provided with 50 Amps maximum branch circuit overcurrent protection installed in accordance with NEC and local electrical code. WARNING: Do not use the charging equipment with an extension cord, surge protector, timer or other adapter. Failure to follow this instruction could result in electric shock or fire. WARNING: The wall plug must fit firmly into the outlet. If the connection feels loose, worn or the outlet is damaged, have a qualified electrician replace the outlet. Using charging equipment with a worn outlet may cause burns, property damage and increase the risk of electric shock. WARNING: Fully insert the plug into the wall outlet. Failure to follow this instruction could result in electric shock. WARNING: Children should be supervised when in the vicinity of the charging equipment while plugged in. WARNING: Do not put fingers into the electric charge coupler. Failure to follow this instruction could result in electric shock. WARNING: This equipment has arcing or sparking parts. Do not expose to flammable vapors. Position this equipment at least 18 in (450 mm) above the floor. WARNING: Do not connect or disconnect any pluggable components of the charging equipment when in use or charging. Failure to follow this instruct can cause damage to the charging equipment. WARNING: Do not use the charging equipment in temperatures outside of the operation range of -22 °F (-30 °C) to 122 °F (50 °C). WARNING: Store the charging equipment in a clean dry place between the temperatures of -22 °F (-30 °C) to 185 °F (85 °C). WARNING: Do not plug the charging equipment into an electrical outlet that is submerged in water or covered in snow. WARNING: Do not use charging equipment in severe rain, snow or electrical storm. WARNING: Do not allow charging equipment to be immersed in water or liquids. Failure to follow this warning could result in fire, electric shock, or serious personal injury or death. WARNING: When using the charging equipment avoid moisture, water, snow and foreign objects at all times. WARNING: Do not replace the plug on the connector. There are critical safety devices in the plug, and the charging equipment will not operate, if the plug is replaced. Failure to follow this instruction could result in electric shock, personal injury, death, or fire. WARNING: Charging equipment contains no user modifiable or repairable parts. If the charging equipment plug does not properly fit into the wall outlet, have a qualified electrician install the correct wall outlet. Failure to follow this instruction could result in personal injury or death. WARNING: High voltage is present in your electric meter housing and power distribution service panel. Contact with high voltage can cause death or serious personal injury. WARNING: Visually inspect the charging equipment before each use. Do not use the charging equipment if it is damaged. WARNING: Keep charging equipment inside when not in use. Stow the control box on the hanger or all the charging equipment in the bag after use to prevent damage to the charging equipment and personal injury. |
Specification Type | Specification Value |
---|---|
Charger Model | SAE |
Voltage | 120-240 VAC |
Maximum Current | 32 Amps max continuous |
Frequency | 60Hz |
Power draw when idle | < 2 Watts |
Cable length | Approximately 20 ft (6.1 m) |
Weight | 8.6 lb (3.9 kg) |
Operating temperature | -22 °F (-30 °C) to 122 °F (50 °C) |
Storage temperature | -22 °F (-30 °C) to 185 °F (85 °C) |
CCID Environmental | IP67 |
Ventilation | Not required |
AConnector. BCoupler. CControl box. |
AAmber fault indicator light. BBlue status indicator light. CRed trouble indicator light. |
Mobile Power Cord Fault Indicator Type | Indicator Description |
---|---|
AMBER | The amber fault indicator illuminates to communicate that the charger is rebooting after an error. |
BLUE | When plugged into the wall outlet, the blue indicator illuminates to communicate that the charger is ready to use. |
RED | The red indicator illuminates when the charger has detected an error. If the red indicator is illuminated, the charger will not deliver power to the vehicle. The error must be corrected before a charging cycle can begin or continue. |
AMBER | BLUE | RED | MODE | ACTION |
---|---|---|---|---|
OFF | OFF | OFF | UNPOWERED; The mobile power cord is not powered. | Make sure the outlet is operational, and the circuit breaker is in the ON position or try using another outlet. Ensure the connector is fully inserted into the mobile power cord. Ensure the plug is not severely degraded. If the error persists, contact us. |
OFF | PULSING | OFF | CHARGING; The mobile power cord is charging. | No action required. |
OFF | ON | OFF | STANDBY; The mobile power cord is powered and ready to charge. At the current time the mobile power cord is not charging the vehicle. | If you expect the mobile power cord to be charging the vehicle, make sure the vehicle coupler is properly inserted into the vehicle. Check and adjust your charging time preferences in the on-screen display. If your vehicle is still not charging, contact us. |
ON | ON | ON | REBOOTING; The mobile power cord is recovering after encountering an error. | Wait for the mobile power cord to return to standby. If the mobile power cord cycles for more than 2-3 minutes, unplug the vehicle coupler. Unplug and replug in the connector. If the issue persists, contact us. |
ON | PULSING | OFF | CHARGING REDUCED; The mobile power cord is charging at a reduced rate due to overheating. | Make sure the connector and the control box are properly connected. Unplug and replug in the connector. If the mobile power cord is warm or in a hot environment, try charging in a cooler area. Try a different outlet. Try a different connector if you have one available. If the error persists, contact us. |
1 FLASH | PULSING | OFF | CHARGING REDUCED, AC PLUG OR WALL OUTLET; The mobile power cord is charging at a reduced rate due to overheating of the connector or the wall outlet. | Make sure the connector and control box are properly connected. Unplug and replug in the connector. If the mobile power cord is warm or in a hot environment, try charging in a cooler area. Try a different outlet. Try a different connector if you have one available. If the error persists, contact us. |
ON | OFF | OFF | USER TROUBLESHOOTING; The mobile power cord has encountered a fault that requires troubleshooting. | Make sure the connector and control box are properly connected. Unplug and replug in the connector. If the mobile power cord is warm or in a hot environment, try charging in a cooler area. Try a different outlet. Try a different connector if you have one available. If the error persists, contact us. |
OFF | OFF | ON | NON - RECOVERABLE FAULT; There is an internal fault in the mobile power cord that cannot be recovered. | Try a different connector if you have one available. If the error persists, contact us. |
OFF | OFF | 1 FLASH | NON - RECOVERABLE FAULT; There is an internal fault in the connector that cannot be recovered. | Try using another connector if you have one available. If not, contact us about obtaining a replacement. If your warranty has expired, you can order a replacement from your Ford dealer. |
OFF | OFF | PULSING | GROUND LEAKAGE FAULT; Electrical current is leaking through a potentially unsafe path. | Potential shock hazard - immediately turn off circuit breaker for the outlet within home. Discontinue use. Contact us about obtaining a replacement. |
Thank You For Your Feedback