Drive Mode Control - Selecting a Drive Mode - Raptor

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Selecting a Drive Mode - Raptor

Rotate the controller located on the center console. Rotate the drive mode controller once to activate the drive mode selection menu in the display. Rotate the controller a second time to select and engage the drive mode.

Note: Button icons vary depending on the vehicle’s configuration.

Selecting a Steering Mode

To change the steering feel, press the button on the steering wheel. The first press displays a pop-up message in the instrument cluster display for the selected mode and subsequent presses changes the selected mode.

Modes:

Normal – Developed to complement vehicle response during daily driving.
Sport – Slightly less assist and damping for improved steering feel during spirited driving.
Comfort – Slightly more assist for driver preference and daily driving ease.
Off-road – Similar assist to Normal with added damping for improved control during off-road driving. The Off-road steering mode is only available in Off-road, Rock Crawl and Baja drive modes.

After selecting the desired setting, you may feel a soft feedback bump in the steering wheel when the changeover occurs.

Note: If you disconnect or remove the battery, the steering system defaults to normal.

Selecting a Suspension Mode

To change the suspension feel, press the button on the steering wheel. The first press displays a pop-up message in the instrument cluster display for the selected mode and subsequent presses changes the selected mode.

Modes:

Normal – Default factory setting.
Sport – Slightly stiffer suspension with emphasis on handling and control.
Off-road – Maximizes shock performance in extreme off-road environments.

Selecting an Exhaust Mode

To change the exhaust sound, press the button on the steering wheel. The first press displays a pop-up message in the instrument cluster display for the selected mode and subsequent presses changes the selected mode.

Modes:

Normal – Default setting provides a balance of comfort and feedback.
Sport – Slightly louder than normal for spirited driving.
Baja – Loudest setting for off-road use only. Maximum exhaust noise under all driving conditions.
Quiet – Quietest setting for maximum comfort under all driving conditions.

Quiet Start

Quiet start allows you to schedule when the exhaust mode turns on the quiet setting. The time window can be from 1 to 24 hours.

Enabling and disabling quiet start:

Press Settings on the touchscreen.

Press Vehicle Settings.

Press Quiet Start.

Press Quiet Start.

Press Settings.

Setting quiet time:

Press Settings on the touchscreen.

Press Vehicle Settings.

Press Quiet Start.

Press Set Quiet Time.

Set your desired start and end times.

MyMode

You can use MyMode to create one custom vehicle configuration based on the current state of your vehicle.

When you have your vehicle configured to your desired settings, you can press and hold the button for a few seconds to save as MyMode.

Double-pressing the button activates your saved MyMode.

You can check the saved MyMode settings with a single press of the button.

You can save the following settings as MyMode:

Drive mode.
Steering mode.
Suspension mode.
Exhaust mode.
Four-wheel drive mode.
Stop and start on or off.
Rear electronic locking differential on or off.

Note: MyMode can only be set with configurations that are available for each drive mode. See Drive Mode Control.

Note: You can save or view MyMode at any time, regardless of your vehicle's speed or transmission selection, as long as your vehicle is running and it meets system conditions.

Note: When activating MyMode, your vehicle must meet all preconditions for the drive mode and various settings before it activates. A message appears if it does not meet system conditions.

Owner's Manual Feedback

Please note that Ford will not respond to individual feedback.
Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
Your feedback will be investigated, and any necessary changes will be updated in the online Owner's Manual.

Submit

Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.