Keyless Entry Keypad (If Equipped) - Keyless Entry Keypad Master Access Code - Vehicles With: Flip Key

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Keyless Entry Keypad Master Access Code - Vehicles With: Flip Key

What is the Master Access Code

The master access code is a factory-set five-digit entry code. You can operate the keypad with the master access code at any time. The master access code can be displayed in the instrument cluster display and is available from an authorized dealer.

Displaying the Master Access Code in the Instrument Cluster Display

Read and understand the following before you begin the process.

You must have two previously programmed keys inside your vehicle.
Make sure that your vehicle is off.
Make sure you do not press the brake pedal during the procedure.
Make sure that you close all the doors and that they remain closed throughout the procedure.

Perform all steps within 30 seconds of starting the sequence. If you perform any of the steps out of sequence, stop and wait for at least one minute before starting again.

Note: Do not start the engine during the process.

Place the first key into the ignition switch.

Switch the ignition on once and wait for a few seconds.

Switch the ignition off and remove the key from the ignition.

Insert the second key into the ignition and switch the ignition on.

The master access code appears in the instrument cluster display for a few seconds.

Note: The code may not display until after other warning messages display.

Owner's Manual Feedback

Please note that Ford will not respond to individual feedback.
Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
Your feedback will be investigated, and any necessary changes will be updated in the online Owner's Manual.

Submit

Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.