Autolamps Switch
WARNING   WARNING:  The system does not relieve you of your responsibility to drive with due care and attention. You may need to override the system if it does not turn the headlamps on in low visibility conditions, for example daytime fog.

When the lighting control is in the autolamps position, the headlamps automatically turn on in low light situations or when the wipers activate.
If equipped, the following also activate when the lighting control is in the autolamps position and you switch them on in the information display:
  • Configurable daytime running lamps.
Note:   If you have autolamps switched on you can only switch the high beam headlamps on once the system has turned the headlamps on.
Windshield Wiper Activated Headlamps (If Equipped)
When the headlamp switch is in the Autolamps position, the windshield wiper activated exterior lamps will turn on within 10 seconds when you switch the windshield wipers on. They turn off approximately 60 seconds after you switch the windshield wipers off.
This feature does not turn on the exterior lamps:
  • During a single wipe.
  • While the wipers are on to clear washer fluid during a wash condition.
Note:   If you have autolamps and autowipers switched on the low beam headlamps will turn on automatically when the windshield wipers operate continuously.
Autolamps Delay (If Equipped)
When the Autolamps have the headlamps and position/parklamps turned on, and the ignition is turned OFF, the headlamps and position/parklamps will remain on for an additional 20 seconds (the autolamp exit delay) or until the Autolamps are disabled.
You can change the delay period in the information display.  See   Information Displays

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok