This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Rear Parking Aid
The rear parking aid sensors automatically turn on when you shift into reverse (R).
As your vehicle moves closer to the obstacle, the rate of the audible warning increases. When the obstacle is less than
11.81 in (30 cm) the warning sounds continuously. If the system detects an object farther than
11.81 in (30 cm) from the corners of the bumper, the tone sounds for only three seconds. If the system detects an approaching object the warning sounds again.
Coverage area of up to
6 ft (1.8 m) from the rear bumper. There is decreased coverage area at the outer corners of the bumper.
The system detects certain objects while the transmission is in reverse (R):- Moving toward a stationary object at a speed of 3 mph (5 km/h) or less.
- Not moving, but a moving object is approaching the rear of your vehicle at a speed of 3 mph (5 km/h) or less.
- Moving at a speed of less than 3 mph (5 km/h) and a moving object is approaching the rear of your vehicle at a speed of less than 3 mph (5 km/h). The system provides audio warnings only when your vehicle is moving or when your vehicle is stationary and the detected obstacle is less than 10 in (30 cm) away from the bumper. Additionally, the system provides obstacle distance indication through the center stack display (if equipped). The visual indications are present when the transmission is in reverse (R).
- As the distance to the obstacle decreases (obstacle becomes closer), the indicator blocks illuminate and move towards the vehicle icon.
- If there is no obstacle detected, the distance indicator blocks show greyed out.
Thank You For Your Feedback