This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.
The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.
Copyright © 2024 Ford Motor Company
Head Restraints
WARNING:
Fully adjust the head restraint before you sit in or operate your vehicle. This will help minimize the risk of neck injury in the event of a crash. Do not adjust the head restraint when your vehicle is moving.
WARNING:
The head restraint is a safety device. Whenever possible it should be installed and properly adjusted when the seat is occupied. Failure to adjust the head restraint properly could reduce its effectiveness during certain impacts.
WARNING:
Adjust the head restraints for all passengers before you drive your vehicle. This will help minimize the risk of neck injury in the event of a crash. Do not adjust the head restraints when your vehicle is moving. |
Note:
Adjust the seat backrest to an upright driving position before adjusting the head restraint. Adjust the head restraint so that the top of it is level with the top of your head and as far forward as possible. Make sure that you remain comfortable. If you are extremely tall, adjust the head restraint to its highest position.
Front Seat Head Restraint
The front seat head restraint consists of: A An energy absorbing head restraint.B Two steel stems.C Guide sleeve adjust and unlock button.D Guide sleeve unlock and remove button. |
Rear Seat Outermost Head Restraint
The rear seat outermost head restraint consists of: AAn energy absorbing head restraint.B Two steel stems.C Guide sleeve adjust and unlock button.D Guide sleeve unlock and remove button.E Fold button. |
Rear Seat Center Head Restraint
The rear center head restraint consists of: AAn energy absorbing head restraint.B Two steel stems.C Guide sleeve unlock and remove button. |
Raising the Head Restraint
Pull the head restraint up.
Lowering the Head Restraint
- Press and hold button C.
- Push the head restraint down.
Tilting the Front Seat Head Restraint (If Equipped)
The front head restraint tilts for extra comfort. To tilt the head restraint, do the following:
- Adjust the seat backrest to an upright driving or riding position.
- Pivot the head restraint forward toward your head to the desired position.
After the head restraint reaches the forward-most tilt position, pivot it forward again to release it to the rearward, un-tilted position.
Folding the Rear Seat Outermost Head Restraint
- Press and hold button E.
- Pull the head restraint back up to reset.
Removing the Head Restraint
Removing the Front Seat Head Restraint and the Rear Seat Outermost Head Restraint
- Pull the head restraint up until it reaches its highest position.
- Press and hold buttons C and D.
- Pull the head restraint up.
Removing the Rear Seat Center Head Restraint
- Pull the head restraint up until it reaches its highest position.
- Press and hold buttons C.
- Pull the head restraint up.
Installing the Head Restraint
Align the steel stems into the guide sleeves and push the head restraint down until it locks.
Thank You For Your Feedback