Jump Starting the Vehicle - Jump Starting the Vehicle

This view of the Owner's Manual contains the very latest information, which may vary slightly from the printed Owner's Manual originally provided with your vehicle. It may also describe content that is not on or operates differently on your vehicle. Please consider the Owner's Manual originally provided with your vehicle as the primary source of information for your vehicle.

The information contained in this publication was correct at the time of release.In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation.No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission.Errors and omissions excepted.

Jump Starting the Vehicle

To Start Your Vehicle

Run the engine of the booster vehicle at a moderately high speed.

Move the transmission selector lever of the low charge vehicle to park (P).

Switch on the ready to drive mode. See Starting the Vehicle.

Run both vehicles for a minimum of three minutes before disconnecting the cables.

Note: Do not switch the headlamps on when disconnecting the cables. The peak voltage could damage the bulbs.

Disconnect the cables in the reverse order.

Owner's Manual Feedback

Please note that Ford will not respond to individual feedback.
Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
Your feedback will be investigated, and any necessary changes will be updated in the online Owner's Manual.

Submit

Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.

Mustang Mach-E Owner's Manual