The following procedure shows the passenger side rear window, driver side is similar.
Image Shown Without Description
  1. Locate the fender and door protector in the tool pouch and install it over the leading edge of the glass to avoid any damage to the roof cap.
Image Shown Without Description
  1. Use the provided head driver to remove the screw-in glass frame from the inside of the vehicle.
  1. Go to the outside of the vehicle.
Note:   The hook feature in the glass allows for a small opening so you can remove the glass from the outside of the vehicle.
Image Shown Without Description
  1. To complete the glass removal process, lift the glass up, pull it out and rock down.
  1. Once removed, safely store the glass and the screws in the storage bag.
To install the glass back on your vehicle:
  1. From the outside of your vehicle, align and seat the glass pins into the rubber frame.
  1. Insert the glass hook into the frame.
  1. Go to the inside of the vehicle.
  1. Pull the glass tight by grabbing the paddle.
  1. Using the provided head driver, align and secure the screws into the glass frame.

Owner's Manual Feedback

Submit

Thank You For Your Feedback

Ok