WARNING   WARNING:  Keep batteries away from children to prevent ingestion. Failure to follow this instruction could result in personal injury or death. If ingested, immediately seek medical attention.
WARNING   WARNING:  If the battery compartment does not securely close, stop using the remote control and replace it as soon as possible. In the meantime, keep the remote control away from children. Failure to follow this instruction could result in personal injury or death.

Battery Replacement Procedure
The remote control uses one coin-type 3-volt lithium battery CR2032 or equivalent.
Press the button to release the key blade before beginning the procedure.
Clip to Release the Battery Cover
  1. Insert a screwdriver, in the position shown and gently push the clip.
  1. Press the clip down to release the battery cover.
Intelligent Key Transmitter Cover Remove
  1. Carefully remove the cover.
Pry the Intelligent Access Key Battery
  1. Insert a screwdriver as shown to release the battery.
Intelligent Key Transmitter Battery Remove
Note:   Do not touch the battery contacts or the printed circuit board with the screwdriver.
  1. Remove the battery.
  1. Install a new battery with the + facing up.
  1. Replace the battery cover.
Battery Disposal   Dispose of old batteries in an environmentally friendly way. Seek advice from your local authority about recycling old batteries.
Note:   Do not wipe off any grease on the battery terminals or on the back surface of the circuit board.
Note:   Replacing the battery does not erase the programmed key from your vehicle.The remote control should operate normally.

Owner's Manual Feedback

  • Please note that Ford will not respond to individual feedback.
  • Please provide detailed feedback regarding any inaccuracies in the content or any missing content in the Owner's Manual.
  • Your feedback will be investigated, and any necessary changes will be updated in the online Owner's Manual. 

Submit

Your input is valuable in helping us improve our Owner's Manual. Thank you for taking the time to provide your feedback.

Ok