THIS TSB HAS BEEN SUPERSEDED OR DEACTIVATED

  
TECHNICAL SERVICE BULLETIN
Unable To Reset Oil Change Indicator - Built On Or Before 18-May-2017
20-2031
14 February 2020

Model:

Ford
2017 Escape

Issue: Some 2017 Escape vehicles built on or before 18-May-2017 may be unable to reset the oil change indicator following the Workshop Manual (WSM), Section 413-01 procedure. This may be due to the instrument panel cluster (IPC) software that was updated and/or an IPC replacement during a previous service visit. To correct the condition, follow the Service Procedure to replace the IPC with an updated service part.

Action: To correct the condition, follow the Service Procedure on vehicles that meet the following criteria:

• 2017 Escape

• Built on or before 18-May-2017

• Unable to reset the oil change indicator

Parts

Service Part NumberPackage Order QuantityDescription
GJ5Z-10849-TGGJ5Z-10849-TG1Instrument Panel Cluster (Miles)
GJ5Z-10849-XGGJ5Z-10849-XG1Instrument Panel Cluster (Kilometers)

Warranty Status: Eligible under provisions of New Vehicle Limited Warranty (NVLW)/Service Part Warranty (SPW)/Special Service Part (SSP)/Extended Service Plan (ESP) coverage. Limits/policies/prior approvals are not altered by a TSB. NVLW/SPW/SSP/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool. For repairs covered by the NVLW, completion of the procedure outlined in this TSB does not require obtaining Prior Approval or completion of a Cost Cap.

Labor Times

DescriptionOperation No.Time
2017 Escape: Replace The IPC (Do Not Use With Any Other Labor Operations)DR202031A0.5 Hrs.

Repair/Claim Coding

Causal Part:10849
Condition Code:42


Service Procedure

For repairs covered by the New Vehicle Limited Warranty, completion of the procedure outlined in this TSB does not require obtaining Prior Approval or completion of a Cost Cap.

1. Replace the IPC. Refer to WSM, Section 413-01.